SOLID FEEDER

 

 

ILJIN-MTS Screw Feeder( TEL:+82-2-2681-9272)E-mail: buypump@hanmail.net

29 years Innovation Technology Feeder & Pumps Engineering

For simple, economical, & highly reliable feeding of dry bulk materials Product Overview ILJIN’s ruggedly built MetaTech Feeder features a compact, space-saving design, low maintenance direct drive, and new Delrin® bushing for highly accurate and dependable metering of powders, pellets, flakes, and agglomerates.   Features/Benefits NEW - only 2 moving parts (Drive and Screw) – ensures reliable, long lasting performance with minimal process downtime NEW - O-Ring Sealed Inline Drive – ensures dust-free operation and makes screw shaft alignment easy after changeout or cleaning. Teflon® Rear Seal Standard – for years of maintenance-free service. Also available with cinch seal Unique Agitator/Conditioner Screw – maintains consistent product density completely filling the feed screw for highly accurate (±1 to 1-1/2%) feeding Interchangeable Screw/Tube Combinations – available in 1/2˝ to 6˝ sizes and permit feed rates from 0.05 to 550 cu. ft./hr. Wide Range of Models – includes space-saving mini, sanitary, and combination feeder/conveyor units All ILJIN Volumetric Screw Feeders feature Metalfab’s rugged design and unique agitator/conditioner screw. In operation, the agitator/conditioner screw begins to move materials forward in the feeder’s trough. Since the agitator/ conditioner screws are larger in diameter than the metering (feeding) screw and of wire configuration, they carry a greater capacity than the metering screw, allowing material to flow through and around it. This 360° influence of material forces entrained air up and out of the metering area and force feeds material into the flights of the metering screw to ensure they are completely full with uniformly dense material.   Agitator Screw Conditioner Screw Operating Characteristics Provides highly accurate, dependable metering of powders, pellets, flakes and agglomerates Ruggedly built for continuous, long-lasting operation Specifications Dimensions Model Feed Rate Max (cu ft/hr) "L" "A" "OD" "HP" MT-3/4 1 8" 2" 1" 3/4 MT-1 3 8 2 3/4 1 1/2 3/4 MT-1 1/2 8 8 2 3/4 2 3/4 MT-2 20 8 2 3/4 2 1/2 3/4 MT-3 60 12 3 1/4 3 1/2 1 MT-4 175 14 3 3/4 4 1/2 1 MT-6 550 21 4 3/4 6 5/8 1 Construction All metal contact parts are available in a choice of carbon steel, epoxy coated carbon steel, 304 stainless steel or 316 stainless steel. Carbon steel exterior primed and painted blue enamel. Stainless steel units provided with 2B mill finish. Drive Motor–HP varies depending upon material and feed requirements

The MTP is an upgrade of the DB1T Volumetric Screw Feeder which incorporates the latest technology including a smaller footprint. The DB1T is still available upon request. Product Overview ILJIN’s MTP Volumetric Screw Feeder provides all of the features available with the standard ILJIN feeders but is designed for the handling of more difficult to feed materials. To solve these problems, the MTP has been designed with greater clearances and larger agitator/conditioner screws (including one for the 6˝ size). Features/Benefits Accuracy: ±1 to 1 1/2% (one minute samples) Screw Sizes – 3˝, 4˝, 6˝ diameter; agitator/conditioning screws 8˝ and 10˝ Feed Rates – 60, 175 or 550 cu. ft./hr. max. Operating Characteristics Handles difficult to meter materials such as film scrap, wood chips, filter cake, asbestos, fibrous products, and other materials which present vexing problems in attempting to fill the flights of the metering screw Specifications Dimensions Model Feed Rate Max (cu ft/hr) Screw Dia. A L OD HP MTP-3 6 - 60 3 3 - 3/4" 12" 3 -1/2” 1 MTP-4 15 - 170 4 4 - 1/2" 14” 5” 1 MTP-6 30 - 550 6 5" 21” 7” 1 - 1/2 Construction Carbon Steel, carbon steel with special coatings, 304 or 316 stainless steel